Restaurant MEP Estimating: Commercial Kitchen HVAC, Plumbing and Electrical

Restaurants pack more mechanical, electrical and plumbing work into a small floor area than almost any other building type. Kitchen hoods, makeup air, grease interceptors, gas piping and dozens of equipment connections all compete for the same space and the same budget. Restaurant MEP estimating is about finding all of that scope on the drawings before bid day, because the items that get missed on a restaurant job are usually the expensive ones.

This guide walks through what a restaurant or commercial kitchen MEP estimate should include, trade by trade, and the questions to ask before you send your number.

Why restaurant MEP estimating is different

  • Equipment drives everything. The kitchen equipment schedule sets the exhaust, makeup air, gas, water, waste and power requirements. If the schedule changes, all three trades change with it.
  • Several parties share the scope. The kitchen equipment supplier, hood manufacturer, fire suppression contractor and MEP subcontractors often split the work. The estimate must show clearly who furnishes and who installs each item.
  • Code requirements are strict. Grease duct, hood exhaust and interceptors are tightly regulated, and the local authority having jurisdiction (AHJ) may add requirements of its own.
  • Many jobs are in existing buildings. Tenant spaces in strip centers and malls bring demolition, roof penetrations, saw-cutting slabs and tie-ins to existing utilities.

Commercial kitchen HVAC estimate: hoods, exhaust and makeup air

Kitchen ventilation is usually the largest and most coordinated part of the mechanical scope.

Kitchen exhaust hoods

Confirm the hood type (Type I for grease-producing appliances, Type II for heat and steam), the hood style and length, and whether the hood package is furnished by the kitchen equipment supplier or by your company. Exhaust rates are set by the mechanical code (IMC Chapter 5 in most US jurisdictions) based on hood style and cooking duty, so check that the design airflow matches the specified hood.

Grease duct and exhaust fans

Grease duct is welded, liquid-tight duct with cleanouts, required clearances and often a fire-rated enclosure or wrap. Take it off separately from standard sheet metal, because the material gauge, welding labor and enclosure cost are very different. Include the upblast exhaust fans, curbs, hinge kits, grease containment and roof penetrations.

Makeup air units

Air that leaves through the hood has to be replaced. Makeup air units, often gas-fired or tempered, are frequently the most expensive single piece of mechanical equipment on a restaurant job. Count the unit, its curb, gas connection, ductwork, diffusers and the interlock with the exhaust fan.

Dining room HVAC and walk-in refrigeration

Rooftop units for the dining area, restroom exhaust, and condensate drains complete the HVAC scope. Walk-in coolers and freezers are often furnished by the equipment supplier, but refrigeration piping, condensers and drains may still land in the mechanical or plumbing bid. Confirm before you price it.

Restaurant plumbing estimate: interceptors, gas and fixtures

  • Grease interceptor or grease trap: size, type (in-ground tank or under-sink unit), location, excavation, concrete or fiberglass tank, and any site work. An outdoor interceptor in an existing building can add saw-cutting, trenching and patching.
  • Floor drains and floor sinks: count every one from the plumbing plan and the kitchen equipment plan. Indirect waste from equipment usually drains to floor sinks.
  • Domestic water: cold and hot water piping, water heater or booster heater for the dishwasher, mixing valves, and backflow preventers at equipment such as ice machines, dishwashers and beverage systems.
  • Natural gas piping: pipe size and length from the meter to each appliance, gas regulators, shutoff valves, and the emergency gas shutoff tied to the hood fire suppression system.
  • Fixtures: hand sinks, three-compartment sinks, mop sinks, prep sinks and restroom fixtures. Note which sinks come with the kitchen equipment package and only need connection.

Commercial kitchen electrical estimate

Restaurant electrical work is dense. A good takeoff covers:

  • Service size, panels and feeders sized for the kitchen equipment load
  • Dedicated circuits and connections for every piece of equipment on the schedule, including voltage, phase and amperage
  • Power to hoods, exhaust fans, makeup air units, walk-in boxes and rooftop units
  • The shunt trip or equipment shutdown tied to the fire suppression system
  • GFCI protection where the code requires it in kitchen areas
  • Lighting for the kitchen, dining room, signage and exterior, plus emergency and exit lights
  • Low voltage rough-in for point-of-sale, music, security cameras and data

Common mistakes in restaurant MEP estimates

  1. Pricing from the MEP drawings only and ignoring the kitchen equipment plan, which shows the real connection points.
  2. Leaving out grease duct enclosures, fire wrap or roof penetrations.
  3. Missing the gas and electrical interlocks between the hood, fire suppression and makeup air unit.
  4. Not clarifying who furnishes the hood, walk-in boxes, sinks and water heater.
  5. Ignoring the site work for an outdoor grease interceptor.
  6. Forgetting after-hours work, inspections and health department requirements in an occupied shopping center.

Restaurant MEP estimating FAQ

What is included in restaurant MEP work?

Restaurant MEP work usually includes kitchen exhaust hoods and grease duct, makeup air, dining room HVAC, gas piping, grease interceptors, floor drains, domestic water, fixtures, power to kitchen equipment, lighting and low voltage rough-in. The exact split depends on what the kitchen equipment supplier provides.

How do you estimate a commercial kitchen hood?

Start with the hood schedule and the cooking equipment under it. Confirm the hood type, style and length, the exhaust and makeup air airflow, the grease duct route to the roof, the exhaust fan and the fire suppression system. Then price each part and add labor for installation, welding, roof work and testing.

Does a restaurant need a grease interceptor?

Most restaurants that cook or wash dishes need a grease interceptor or grease trap, but the size and type are set by the local plumbing code and the sewer authority. Always check the plumbing drawings and the local requirements before pricing it.

Get a restaurant MEP estimate

MEP Estimation Services prepares detailed takeoffs and estimates for restaurant and commercial kitchen projects across the United States, including mechanical and kitchen ventilation, plumbing and gas piping and electrical work. You get line-item quantities, color-coded marked-up drawings and an Excel file, usually within 24-48 hours. If your restaurant is part of a shopping center fit-out, see our guide to tenant improvement MEP estimating, or explore our full MEP estimating services.

Send your plans for a free quote.